Industry News

Pole light installation details and precautions

Update:20-05-2022

A new type of lighting device composed of a steel column lamp pole with a height of 15 meters and a high-power combined lamp frame. It is composed of lamp holder, internal lamp electrical, rod body and basic part.
The pole body is generally a cylindrical single-body structure, made of rolled steel plates, and the height is 25-40 meters, which refers to a new lighting device composed of a steel column lamp pole and a high-power combined lamp frame above 25 meters. It is composed of lamp holder, internal lamp electrical, rod body and basic part.
The shape of the lamp head can be determined according to the user's requirements, the surrounding environment, and the lighting needs; the internal lamps are mostly composed of led flood lights and floodlights, and the light sources generally use high-pressure sodium lamps and metal halide lamps. , The lighting radius is up to 60 meters. The rod body is generally a cylindrical single-body structure, rolled with steel plates, and has a height of 15-40 meters.


The following is a brief description of the installation details and precautions.
(1) First, connect the hoist of the lifting system to the main oil wire and fix it in place, and then feed the main oil wire into the second and third pipes in turn.
(2) Plug in, flatten the bottom section with brick or wood, insert the second and third sections into each other with a crane, pull the main oil wire out about 1 meter from the upper section, and connect the three auxiliary oil wires through the oil wire connecting plate. Connect, high pole lamp manufacturer, and then drag the main oil wire from top to bottom to the position about 50 cm from the top of the oil wire connecting plate, and then put on the rain cap.
(3) For the vertical pole, connect the three auxiliary oil wires to the flange of the low section, use the power of the winch to tighten the three sections as much as possible, and then prepare a sling with a length of about 20 meters. Tons), the flange motor door is fixed, and then the whole is lifted by a crane.
(4) In order to prevent the lamp from being damaged during lifting, it is recommended to connect the split lamp panel to the main body of the lamp pole before installing the lamp.
(5) Commissioning, parking lot high pole lights, after the lamp panel is installed, connect the three auxiliary oil wires to the lamp panel, then start the hoist to raise the lamp panel, test whether the hook is removed smoothly, connect the power supply, and the installation is completed.