FuJing Lighting - Pursue quality and cast high-quality goods.
Cruus is one of the UL classification marks, which refers to the approved component marks used in Canada and the United States. This is a new UL approved part tag that came into effect on April 1, 1998. It can be used for parts certified by UL according to both Canadian and American requirements. Originally, UL did not intend to introduce a combined approved component mark, but because the users of UL certificates who sell products to Canada and the United States like the Canadian / U.S. list and grading mark very much, this new mark was introduced.
The FCC, the Federal Communications Commission, is directly responsible to Congress. Service products: lamps (LED lamps, LED screens, LED power / driver ballasts, energy-saving lamps, stage lamps, dimmers, converters, stage and other electronic dimming equipment for entertainment places, AC electronic ballasts for tubular fluorescent lamps, tubular fluorescent lamps, ballasts, ballasts for discharge lamps, fixed lamps, movable lamps, embedded lamps, etc.).
The CE logo is a security certification mark and is considered a passport for manufacturers to open and enter the European market.CE stands for the European Union (CONFORMITE EUROPEENNE).All products marked with the "CE" mark can be sold in the EU member states without meeting the requirements of each member state, thus enabling the free flow of goods within the EU member states. CE certification is arguably the most advanced product compliance evaluation model in the world today. It is the first to introduce the module concept, where the evaluation module and the evaluation module are used to evaluate a product that is suitable for the CE mark.The evaluation procedure consisting of some evaluation modules.
ENEC (EuropeanNorms Electrical Certification) is a certification program for CENELEC (European Commission for Electrical Standardization) which is a common European standard for products that meet specific European standards such as lighting, components, and office-data equipment.
TUV: The logo is a security certification mark specially designed for components by TU V in Germany and is widely recognized in Germany and Europe.At the same time, enterprises can combine to apply for CB certificates when applying for TU V marks, thus obtaining certificates from other countries through conversion.Moreover, after the products have been certified, German T V will go forward to inquire the qualified component supplier's Rectifier Factory to recommend these products; during the whole machine certification process, any component that has obtained the T V mark can be exempted from inspection.
CQC: The Chinese Quality Certification Center (CQC) is a professional certification body CQC approved and set up by relevant state departments.And its branches at home and abroad are the earliest, largest and most authoritative certification institutions in China to carry out quality certification work. They have accumulated rich experience in international quality certification over the past decades, and have achieved outstanding results in various businesses. The number of certified customers ranks first in the national certification institutions and the top in the global certification institutions.
CB system (IEC system for electrical product qualification test and certification) is an international system for IECEE operation. The IECEE member certification organizations test the safety performance of electrical products based on IEC standards, and the test results are CB test reports and CB test certificates.The purpose is to reduce international trade barriers arising from the need to meet the accreditation or approval criteria of different countries.IECEE is the abbreviation of the International Electrotechnical Commission Organization for the Qualification Testing and Certification of Electrical Products.The IECEE CB system is the first true international system recognized by the safety test reports of electrical products.Multilateral agreements are formed between national certification authorities (NCBs) in each country, and manufacturers can obtain national certifications from other member states of the CB system by virtue of a CB test certificate issued by the NCB.
PSE certification is a mandatory Japanese safety certification to prove that electrical and electronic products have passed the safety standard tests of the Japanese Electrical and Material Safety Act (DENANLaw) or the International IEC standard.Japan's ENTORL Act (Electrical Equipment and Material Control Act) requires 498 products to enter the Japanese market through safety certification.Among them, 165 Class A products should obtain diamond PSE marks and 333 Class B products should obtain circular PSE marks.
The Republic of korea:
KC MarkCertification Products List (KC Certification Product Catalogue) According to the provisions of the Korean Electrical Appliances Safety Management Law, the safety certification of electrical products from January 1, 2009 is divided into mandatory certification and self-regulatory (voluntary) certification.
Mandatory certification means that all electronic products belonging to mandatory products must be KC Mark certified before they can be sold in the Korean market. They are subject to Factory review and product sampling test every year.
SAA is the standard body for Australia under Standards Association of Australian, so many friends call Australian certification.Electrical products entering the Australian market must be SAA certified.There are two main SAA symbols, one is the form of approval, the other is the standard symbols.Formal certification is only responsible for samples, while standard labels are subject to review by each factory.The certification scope of SAA is mainly divided into quality management system, environmental management system, occupational health and safety management, information security management, and the period of 3-4 weeks for common products to apply for SAA certification in Australia. If the product quality does not meet the standards, the date may be extended.If the delivered product is not certified, the product will be detained or confiscated or a fine will be imposed.
CTICK A/C-Tick is a certification mark issued by the Australian Communications Authority (ACA) for communication equipment.Manufacturers and importers must use A/C-Tick as follows:
1. Product Execution ACAQ Technical Standard Test
2. Register A/C-Tick with ACA
3. Fill in the Declarationof Conformity Form and save the C-tick certification with the product compliance record
4. Label with A/C-Tick on communication products or devices