Industry News

Benefits of choosing 15-25m pole lamp lighting


15-25 meter high pole lamp manufacturers can generally be divided into lifting and non lifting type when producing high pole lamp lighting. The height of the lifting main pole is generally over 18 meters, and the electric lifting operation is convenient. When the light plate is raised to the working position, the panel can be taken off and hung actively, and the steel wire rope can be unloaded.
Advantages of high pole lighting:
The lifting high pole lamp is equipped with manual and electric lifting control methods, which can make the light panel fall safely and reliably to 2.5m above the ground, so as to facilitate the protection operation. The length of the lead out line of manual remote control equipment is 10 meters, and the operator can control the lifting of the lamp panel at 5m, so as to ensure the safety of the operator. The high pole lamp is equipped with a spare cable. When the light panel is lowered to a low position, one end of the cable is stabbed into the socket of the electrical control system and the other end is inserted into the junction box on the light panel, so that the lamp panel can be directly powered and the lamps can be repaired.
Benefits of high pole lighting:
The sealing grade of all lamps of the high pole lamp is IP65 international standard to avoid the dust and rain water immersion and ensure the service life of the bulb. The materials of lamps are generally aluminum alloy plates and stainless steel with good corrosion resistance.
Medium pole lamp: the structure and the bottom structure are calculated according to the appearance shape confirmed by the tenderee and the structural parameters of the manufacturer, and the anti-seismic level 7 and wind resistance grade 12 are used for the protection; the main pole is of twelve edge pyramid shape, and the lamp pole is convenient for transportation;
High pole lamp: the pole is of plug-in type, each section is formed once, the length of plug-in shall not be less than 500mm, and the cooperation clearance after the pole is plugged shall not be greater than 3mm, and reliable limit equipment and solid equipment shall be set.
Medium pole lamp: generally, it refers to the installation of active lifting equipment, and adopts plug-in type for a slightly small range of lighting. The light source is usually 6, and the height generally refers to 9-18 meters. The compensation problem is the middle pole lamp.
High pole lamp: it can not lift or lift.